9 Cricut Alternatives for Vinyl, Paper and Fabric

  • Last updated November 14, 2026
  • 9 options compared
  • Prices checked on official sites
Quick answer

Cricut Maker 4 is the default pick for most readers who want one machine for vinyl, paper, fabric and thicker materials, while Silhouette Cameo 5 Alpha is the best pick for vinyl and sticker work without an optional subscription for the full design library. Cricut Explore 4 is the lower cost Cricut in this set at $249.99, and Cricut states that it is sold only through retailers and not through cricut.com, which changes where you check stock and returns. xTool M1 Ultra is no longer available for purchase through xTool, and xTool points buyers to the newer xTool M2, which starts at $549.

Pick by material first, then by width, then by software. A blade cutter suits vinyl, paper, card and fabric. A laser suits wood, leather and acrylic. Check the cutting width, the maximum thickness, and whether the full design library needs an optional subscription before you buy.

On this page
  1. Comparison table
  2. 1. Cricut Maker 4
  3. 2. Cricut Explore 4
  4. 3. Silhouette Cameo 5 Alpha
  5. 4. Brother ScanNCut DX SDX125E
  6. 5. Siser Juliet
  7. 6. Siser Romeo
  8. 7. LOKLiK iCraft
  9. 8. Glowforge Aura
  10. 9. xTool M2
  11. How we chose
  12. Which machine fits your budget and width
  13. FAQ
  14. Sources

Cricut alternatives: comparison table

Swipe the table sideways on a phone to see every column.

#NameBest forStarting priceFree plan / trialLink
1Cricut Maker 4Most materials and fabric work$379Not applicableVisit
2Cricut Explore 4Vinyl, paper and card projects$249.99Not applicableVisit
3Silhouette Cameo 5 AlphaVinyl and stickers without a subscription$299.99Not applicableVisit
4Brother ScanNCut DX SDX125EScanning drawings and printed fabricquote onlyNot applicableVisit
5Siser JulietHeat transfer vinyl for shirts$496.99Not applicableVisit
6Siser RomeoWide heat transfer vinyl rolls$699Not applicableVisit
7LOKLiK iCraftLow cost vinyl and paper cutting$199.99Not applicableVisit
8Glowforge AuraLaser engraving and wood projects$999Not applicableVisit
9xTool M2Laser, blade and print work in one machine$549Not applicableVisit

The 9 best cricut alternatives, in detail

1

Cricut Maker 4

Best for: Most materials and fabric work

Cricut Maker 4 is the current premium Cricut blade cutter, and Cricut lists it at $379, down from $399. It cuts vinyl, iron-on, paper, card, fabric, leather, balsa wood and other materials up to 2.4 mm thick. The box includes a fine-point blade, a fine point pen, a light grip mat and a mini weeder.

Pricing$379
Free plan / trialNot applicable
Websitecricut.com
  • The Adaptive Tool System is the reason to choose Maker 4 over Explore 4.
  • It accepts the rotary blade for fabric, the knife blade for thicker materials, the scoring wheel and the engraving tip.
  • Design Space is free to download, and the optional Cricut Access subscription adds the full image and font library.
  • Choose Maker 4 if you sew or cut fabric.

Pros

  • Cuts more than 300 materials
  • works with 13 tools through the Adaptive Tool System
  • cuts Smart Materials up to 12 feet without a mat

Cons

  • Full Design Space library needs the optional Cricut Access subscription at $9.99 per month
  • rotary blade and knife blade are sold separately

Visit Cricut Maker 4 →

2

Cricut Explore 4

Best for: Vinyl, paper and card projects

Cricut Explore 4 launched at $249.99 in the United States, and Cricut lists the same starting price in its Explore 5 comparison. It cuts vinyl, iron-on, paper and card, and it works with Smart Materials without a mat for cuts up to 12 feet long. It is a good fit for cards, stickers, labels, decals and iron-on shirts.

Pricing$249.99
Free plan / trialNot applicable
Websitecricut.com
  • One limit: Explore 4 does not accept the Maker tool set, so fabric cutting with a rotary blade and cutting thicker materials with a knife blade are ou
  • Choose Explore 4 if you want a current Cricut at a lower machine price.
  • Choose Maker 4 if you need fabric tools.

Pros

  • Lower price than Maker 4
  • cuts Smart Materials up to 12 feet without a mat
  • cuts up to two times faster than the previous Explore on card and vinyl on a mat

Cons

  • No Adaptive Tool System, so no rotary blade or knife blade
  • sold only through retailers, not through cricut.com

Visit Cricut Explore 4 →

3

Silhouette Cameo 5 Alpha

Best for: Vinyl and stickers without a subscription

Silhouette Cameo 5 Alpha is the current 12 inch Silhouette cutter, and Target lists the 12 inch machine at $299.99. Silhouette lists the 5 Alpha at $279.99 on its own range page, so retailer price can differ from the Silhouette list price. It cuts vinyl, heat transfer vinyl, paper, card and sticker sheets, and it cuts lined material up to 16 feet without a mat.

Pricing$299.99
Free plan / trialNot applicable
  • It includes a built-in cross cutter for roll material.
  • Silhouette Studio Basic is included, it works offline, and it does not need a subscription to keep cutting.
  • One limit: Basic does not open SVG files, so buyers who work with SVG designs need the Designer Edition upgrade.
  • Choose Cameo 5 Alpha for vinyl and stickers.

Pros

  • Silhouette Studio Basic is included with no subscription
  • cuts lined material up to 16 feet without a mat
  • built-in cross cutter trims rolls

Cons

  • Silhouette Studio Basic does not open SVG files, so the Designer Edition upgrade is needed for SVG import
  • 3 mm maximum material thickness

Visit Silhouette Cameo 5 Alpha →

4

Brother ScanNCut DX SDX125E

Best for: Scanning drawings and printed fabric

Brother ScanNCut DX SDX125E is the only machine in this set with a built-in scanner. It scans a drawing, a printed shape or a fabric print at up to 600 DPI, shows it on the 5 inch touchscreen, and cuts it with no computer, phone or account. It cuts materials up to 3 mm thick with the auto blade, which senses material thickness.

Pricingquote only
Free plan / trialNot applicable
  • It includes 682 built-in designs and 9 fonts.
  • Brother lists the SDX125E at a $499.99 manufacturer suggested price in its comparison chart, while retailers list it at about $449.99.
  • A Staples bundle with the SDX125EGY machine and a duffle bag is listed at $529.99.
  • Choose ScanNCut if your designs start on paper or printed fabric.

Pros

  • Built-in scanner up to 600 DPI
  • 5 inch touchscreen works with no computer
  • 682 built-in designs and 9 fonts

Cons

  • Brother does not publish a fixed machine price, so check a dealer before you buy
  • specialty tools and embroidery software are sold separately

Visit Brother ScanNCut DX SDX125E →

5

Siser Juliet

Best for: Heat transfer vinyl for shirts

Siser Juliet is a 12 inch high-definition cutter built for heat transfer vinyl, and USCutter lists the machine at $496.99. It cuts up to 13.5 inches wide, works with Siser EasyWeed heat transfer vinyl and EasyPSV adhesive vinyl, and connects by USB and Wi-Fi. Leonardo Design Studio is included, with preinstalled cut settings for Siser materials.

Pricing$496.99
Free plan / trialNot applicable
Websitesiser.com
  • Juliet suits shirt makers who already buy Siser vinyl.
  • One limit: Siser does not publish a fixed price, so confirm the current dealer price and what is in the box before you order.
  • Choose Juliet if heat transfer vinyl is your main work.

Pros

  • 12 inch cutting width for heat transfer vinyl
  • Leonardo Design Studio is included
  • preinstalled cut settings for Siser heat transfer vinyl and adhesive vinyl

Cons

  • Siser does not publish a fixed manufacturer price, so dealer price varies
  • smaller user community and fewer tutorials than Cricut

Visit Siser Juliet →

6

Siser Romeo

Best for: Wide heat transfer vinyl rolls

Siser Romeo is the 24 inch version of Juliet, and a dealer bundle page lists the standalone Romeo at $699. It cuts materials up to 24 inches wide, with matless cutting up to 15 feet, and it includes a roll holder. It has 800 grams of cutting force, a built-in camera for print-and-cut work, and the same Leonardo Design Studio software as Juliet.

Pricing$699
Free plan / trialNot applicable
Websitesiser.com
  • Romeo suits a small shop that runs 15 inch or 20 inch rolls, team uniforms or full back prints.
  • One limit: at 36.25 inches long and 21 pounds, it needs a permanent bench.
  • Choose Romeo if wide vinyl work is already a regular job.

Pros

  • 24 inch cutting width for wide rolls
  • 800 grams of cutting force
  • built-in camera for print-and-cut work

Cons

  • 36.25 inch footprint and 21 pound weight need a permanent workspace
  • higher price than Juliet and most 12 inch cutters

Visit Siser Romeo →

7

LOKLiK iCraft

Best for: Low cost vinyl and paper cutting

LOKLiK iCraft is the lowest price machine in this set, at $199.99 for the machine on LOKLiK, with bundles at $199.99 to $219.99 depending on the included materials. It cuts more than 100 materials, including vinyl, heat transfer vinyl, paper and card, and it works with 12 inch by 12 inch mats. It offers print-and-cut accuracy down to 0.5 mm and matless cutting up to 21 feet.

Pricing$199.99
Free plan / trialNot applicable
Websiteloklik.com
  • LOKLiK IdeaStudio is free and includes more than 18,000 ready-made images.
  • IdeaStudio does not put the main cutting features behind a subscription.
  • One limit: the box includes fewer tools than the Cricut and Silhouette boxes, so budget for extra blades and mats.
  • Choose iCraft if price is the main limit.

Pros

  • Lowest machine price in this set at $199.99
  • cuts more than 100 materials
  • print-and-cut accuracy down to 0.5 mm

Cons

  • Fewer tools included in the box than Cricut or Silhouette
  • smaller user base, so fewer tutorials and third-party accessories

Visit LOKLiK iCraft →

8

Glowforge Aura

Best for: Laser engraving and wood projects

Glowforge Aura is a craft laser, not a blade cutter, and the Glowforge shop lists it at $999. It measures 22 inches by 20.5 inches by 5 inches, weighs about 19 pounds, and fits material up to 12 inches by 12 inches. It cuts material up to 0.25 inch thick and engraves objects up to 0.75 inch high with the cutting tray removed.

Pricing$999
Free plan / trialNot applicable
  • The Glowforge App is web-based and includes a live camera preview.
  • One limit: Aura needs Wi-Fi for every job, and without the Premium subscription you cannot create custom material settings or use most built-in fonts,
  • Glowforge also warns that laser cutting vinyl will destroy the laser.

Pros

  • 6 watt laser cuts and engraves wood, leather and acrylic
  • live camera preview in the Glowforge App
  • 12 month warranty

Cons

  • Needs Wi-Fi for every job, with no offline mode
  • cannot cut vinyl, glass, clear acrylic, white acrylic or blue acrylic
  • full design features need the Premium subscription at $50 per month

Visit Glowforge Aura →

9

xTool M2

Best for: Laser, blade and print work in one machine

xTool M2 is the current xTool craft machine, and xTool lists it from $549. It replaces the M1 Ultra, which xTool says is no longer available for purchase through xTool. The M1 Ultra started at $899, so the M2 starts $350 lower.

Pricing$549
Free plan / trialNot applicable
Websitextool.com
  • The M2 keeps the multi-craft idea: laser cutting and engraving, blade cutting, colour printing and pen drawing in one machine.
  • The M2 suits a buyer who wants laser work plus blade cutting without buying two machines.
  • One limit: PVC vinyl must not go under a laser, so vinyl work still needs a blade module.
  • Choose M2 if you want laser and blade work in one machine.

Pros

  • Starts at $549, below the old M1 Ultra at $899
  • combines laser, blade, print and pen work
  • newer machine with current support

Cons

  • Laser work needs ventilation and safety care, and PVC vinyl must not go under a laser
  • modules and accessories add cost above the $549 starting price

Visit xTool M2 →

How we chose

We chose machines that cut vinyl, paper, card, fabric or laser-compatible materials. Prices and plan limits come from official vendor pricing pages and major retailer pages opened on 2026-11-12. We did not test any tool hands-on. Where a vendor does not publish a fixed price, we wrote quote only for Brother ScanNCut DX SDX125E. Cricut Explore 4 is sold only through retailers and not through cricut.com, and xTool M1 Ultra is no longer available through xTool, with the M2 starting at $549 in its place.

Which machine fits your budget and width

Budget and need Pick Price and width
Under $250, vinyl and paper Cricut Explore 4 or LOKLiK iCraft $249.99 or $199.99, 12 inch
Vinyl and stickers, no subscription Silhouette Cameo 5 Alpha $299.99, 12 inch
Most materials and fabric Cricut Maker 4 $379, 12 inch
Scanning drawings and fabric Brother ScanNCut DX SDX125E quote only, 12 inch
Heat transfer vinyl shirts Siser Juliet $496.99, 12 inch
Wide vinyl rolls and shop work Siser Romeo $699, 24 inch
Laser engraving and wood Glowforge Aura $999, 12 inch by 12 inch
Laser plus blade in one machine xTool M2 $549, laser and blade

Frequently asked questions

How much does a Cricut alternative cost?

A blade cutter in this set costs $199.99 to $699, with LOKLiK iCraft at $199.99, Cricut Explore 4 at $249.99, Silhouette Cameo 5 Alpha at $299.99, Cricut Maker 4 at $379, Siser Juliet at $496.99 and Siser Romeo at $699. Glowforge Aura costs $999 as a laser, and xTool M2 starts at $549. Brother ScanNCut DX SDX125E is quote only, because Brother does not publish a fixed price.

Which is the best Cricut alternative for vinyl?

Silhouette Cameo 5 Alpha is the best pick for vinyl and stickers, because Silhouette Studio Basic is included with no subscription, it cuts lined vinyl up to 16 feet without a mat, and it includes a built-in cross cutter. Cricut Maker 4 is the best pick if you also cut fabric and thicker materials, and Siser Juliet is the best pick if heat transfer vinyl for shirts is your main work.

Which is the best Cricut alternative for fabric?

Cricut Maker 4 is the best pick for fabric, because its Adaptive Tool System accepts a rotary blade for fabric and a knife blade for thicker materials, and it cuts more than 300 materials. Brother ScanNCut DX SDX125E is the best pick if you cut printed fabric, because its built-in scanner can scan a printed fabric shape and cut it with no computer.

Do I need a subscription to use a Cricut alternative?

No, not for the machines in this set. Silhouette Studio Basic, LOKLiK IdeaStudio, Leonardo Design Studio and Brother CanvasWorkspace include the main cutting features with no subscription. Cricut Design Space is free to download, but the full image and font library needs the optional Cricut Access subscription at $9.99 per month. Glowforge Premium is $50 per month for full features.

Can a Cricut alternative cut wood and leather?

Yes, with limits. Cricut Maker 4 cuts balsa wood and leather up to 2.4 mm thick with the right blade. Glowforge Aura cuts wood and leather up to 0.25 inch thick with its 6 watt laser, and xTool M2 cuts and engraves wood and leather with its laser module. Check the maximum thickness for each machine before you buy material.

Is a laser machine a good Cricut alternative?

A laser is a good alternative only if your work fits laser materials. Glowforge Aura and xTool M2 engrave wood, leather and acrylic and cut wood signs, which a blade cutter cannot do in the same way. A laser is a poor fit for vinyl, stickers and fabric, because vinyl must not go under a laser and fabric cutting is slower and less clean than blade cutting.

Sources

Prices and features were read on each company’s own website in November 2026. They change often, so confirm the current offer on the official site before you sign up or buy.